Cavity Eye at FANUC Fröccs Fesztivál: A Live Look Inside a 16-Cavity Mold

How evenly do 16 cavities fill in a single injection molding cycle? At FANUC Fröccs Fesztivál, visitors could explore that question by comparing live cavity pressure curves as a FANUC ROBOSHOT S180C ran beside them.
Cavity Eye took part as an exhibiting partner at FANUC Hungary’s facility in Törökbálint on November 10–11, 2026. We brought the same 16-cavity application we had showcased at FAKUMA, combining Cavity Eye cavity pressure monitoring with simulation-based hot runner balancing.
Each day began with an opening presentation, followed later by a technical session. On Tuesday, András Szűcs, PhD, Chief Technology Officer, delivered both presentations. On Wednesday, Szabolcs Horváth, PhD, Key Account Manager, gave the opening presentation, and Tibor Dombai, BDC Representative, led the technical session.
Beside the running machine, our team showed visitors how to compare pressure curves from the same cycle, spot differences in how the cavities filled and use those observations to decide where to start troubleshooting. Csaba Csipke, Application Engineer, and József Fehér, Account Manager, were also part of the Cavity Eye team at the event.
Visitors could also learn about our MOLDi and NET4.0 solutions, engineering services, pilot projects and practical training. The festival featured a much smaller ROBOSHOT, too. The moving model was built from 2,619 LEGO® bricks, designed by DidactoBricks and assembled by the FANUC Hungary team.
We were delighted to see how excited the winners were to receive the prizes Cavity Eye contributed to the festival raffle: six copies of Injection Molding Mastery and two places in our 2027 training program. For future giveaways and book discounts, follow Cavity Eye on LinkedIn and Facebook and keep an eye on our website.
Thank you to FANUC Hungary for hosting us and to everyone who stopped by the ROBOSHOT to ask questions and share their own molding challenges.


