News

Blog

show all

02 26, 2021

Solution to avoid customer complaint caused by short shot!

Solution to avoid customer complaint caused by short shot!

A fairly common problem in injection moulding that there are scrap products because of short shot. Even if only one faulty product is not identified, it can endanger the whole shipment and cause customer complaint resulting profit loss. The Cavity Eye system can help you identify when there is a problem with product, so it can be separated.

12 14, 2020

WinInMo presenting its network during Innovation Day at Wirth

WinInMo presenting its network during Innovation Day at Wirth

The network "WinInMo" develops solutions for a sustainable and permanently reliable injection moulding process. Goals include energy savings, optimmalization of heating and temperature control circuits and the operational reliability of cooling water circuits. This requires a new conception and development of the thermal installation space, the cooling water treatment and online monitoring of all process parameters. Developments with new biogenic plastics open up additional future market opportunities. CAVITY EYE provides the visualization of the process parameters and supervises the entire injection moulding process.

11 17, 2020

Measuring the melt viscosity in practice - Part 1

Measuring the melt viscosity in practice - Part 1

In industrial environment viscosity measuring is extremely useful, because it gives a lot of data in a short amount of time for the engineers to launch the production easier. Thanks to the measurement a decision can be made about the condition of the raw material and its preparation. In this blog article you can learn about the theoretical background and the procedure of the measurement. We show the viscosity dependence on the temperature with PA6-GF30 material.